PAROC eXtra is a multipurpose low-density insulation (lambda 0,036 W/mK) for wood and metal-framed exterior and partition walls, ventilated facades, pitched roofs and ventilated floors. In ventilated structures, the product is installed as a two-layer solution together with wind protection insulation.
The slab is fast to cut with knife or saw and easy to install in various frame structures and forms as it stays firmly in place without installation supports. The PAROC eXtra width of the product helps in tight installation of the insulation board against the frame.
Ready-made slab widths for metal (cc600) and wood-framed structures (cc600 / cc 900 / cc1200) minimizes the cuttingwork and waste.
PAROC eXtra stone wool insulation contributes to enhanced fire resistance and sound insulation properties of structures (EC 5 calculations and ETA 07/0071, light partitions).
PAROC eXtra plus is a multipurpose insulation slab (lambda 0,034 W/mK) for ventilated facades, pitched roofs and ventilated floors. In ventilated structures, the product is installed as a two-layer solution together with wind protection insulation.
The insulating board is quick to cut with a knife or saw and easy to install in various frame structures and shapes. It stays firmly in place without installation supports. The PAROC eXtra width of the product helps in tight installation of the insulation board against the frame.
Ready board dimensions for wooden frame structures (cc600) minimize cutting work and waste.
The dense fiber structure effectively prevents the movement of air inside the insulating layer due to temperature differences, so that the product's insulating ability is maintained even in challenging winter conditions.
PAROC eXtra plus stone wool insulation contributes to enhanced the fire and sound insulation properties of timber structures (EC 5 calculations).
PAROC Natura Lana is a CO2-compensated multipurpose low-density insulation (lambda 0,036 W/mK) for low-carbon buildings. It can be used in wooden frame exterior and partition walls, ventilated facades, pitched roofs and ventilated floors. In ventilated structures, the product is installed as a two-layer solution together with PAROC Natura Wind wind protection insulation.
The slab is fast to cut with knife or saw and easy to install in various frame structures and forms as it stays firmly in place without installation supports.
One compact slab size fits without cutting into the cc600 and 900 frame division, which minimizes the amount of cutting work and waste.
The greenhouse gas (GHG) emissions from PAROC Natura Lana production are very low (GWP A1-A3* = 0.34 kg CO2eq/m2, R=1). All the GHG emissions are compensated for the entire product's lifetime with globally verified projects (Gold Standard). SCS certification guarantees the carbon neutrality of PAROC Natura Lana.
PAROC UNM 37 is a soft insulation mat (lambda 0,037 W/mK) that is used to level uneven surfaces under the actual insulation layer. The product can also be used to insulate curved surfaces and joints.
Using soft insulation to correct an uneven surface is a quick way to avoid air pockets remaining in the thermal insulation layer that weaken the thermal insulation.
Strips of different widths can be quickly cut from the insulation mat roll with a knife or saw according to the insulation need.